Compare commits

..

No commits in common. "778d1cfe212edf5d3e801e0d10196bcd9a50e828" and "85699fd1c595fe29dc76f82822511d20dbd776b3" have entirely different histories.

14 changed files with 1950 additions and 2819 deletions

Binary file not shown.

File diff suppressed because it is too large Load Diff

Binary file not shown.

File diff suppressed because it is too large Load Diff

View File

@ -24,7 +24,7 @@ INCLUDE "globals.asm"
SECTION "Grade Variables", WRAM0 SECTION "Grade Variables", WRAM0
wDecayRate: ds 1 wDecayRate: ds 1
wInternalGradePoints: ds 1 wGradePoints: ds 1
wInternalGrade: ds 1 wInternalGrade: ds 1
wDisplayedGrade:: ds 1 wDisplayedGrade:: ds 1
wEffectTimer:: ds 1 wEffectTimer:: ds 1
@ -38,17 +38,140 @@ wSRate: ds 1
wDRate: ds 1 wDRate: ds 1
wTRate: ds 1 wTRate: ds 1
wQRate: ds 1 wQRate: ds 1
wPrevCOOL: ds 3
wCOOLIsActive:: ds 1
wSubgrade: ds 1
wREGRETChecked:: ds 1
wGradeBoosts: ds 1
wTGM1level300RequirementMet: ds 1 wTGM1level300RequirementMet: ds 1
wTGM1level500RequirementMet: ds 1 wTGM1level500RequirementMet: ds 1
wTGM1level999RequirementMet: ds 1 wTGM1level999RequirementMet: ds 1
SECTION "Grading Data", ROMX, BANK[BANK_GAMEPLAY] SECTION "Grading Data", ROM0
; The Score Thresholds are 3/4th of the original ones.
sTGM1GradeScores:
dw $0003 ;00 — 8
dw $0006 ;00 — 7
dw $0009 ;00 — 6
dw $0015 ;00 — 5
dw $0021 ;00 — 4
dw $0039 ;00 — 3
dw $0060 ;00 — 2
dw $0090 ;00 — 1
dw $0120 ;00 — S1
dw $0165 ;00 — S2
dw $0225 ;00 — S3
dw $0300 ;00 — S4
dw $0390 ;00 — S5
dw $0495 ;00 — S6
dw $0615 ;00 — S7
dw $0750 ;00 — S8
dw $0900 ;00 — S9
sTGM3InternalGradeSystem:
db 125, 10, 20, 40, 50 ;Decay rate, (Internal grade points awarded for:) Single, Double, Triple, Tetris
db 80, 10, 20, 30, 40
db 80, 10, 20, 30, 40
db 50, 10, 15, 30, 40
db 45, 5, 15, 20, 40
db 45, 5, 15, 20, 30
db 45, 5, 10, 20, 30
db 40, 5, 10, 15, 30
db 40, 5, 10, 15, 30
db 40, 5, 10, 15, 30
db 40, 2, 12, 13, 30
db 40, 2, 12, 13, 30
db 30, 2, 12, 13, 30
db 30, 2, 12, 13, 30
db 30, 2, 12, 13, 30
db 20, 2, 12, 13, 30
db 20, 2, 12, 13, 30
db 20, 2, 12, 13, 30
db 20, 2, 12, 13, 30
db 20, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 10, 2, 12, 13, 30
db 10, 2, 12, 13, 30
sTGM3GradeBoosts:
db 0
db 1
db 2
db 3
db 4
db 5
db 5
db 6
db 6
db 7
db 7
db 7
db 8
db 8
db 8
db 9
db 9
db 10
db 11
db 12
db 12
db 12
db 13
db 13
db 14
db 14
db 15
db 15
db 16
db 16
db 17
; sTGM3ComboMultipliers:
; db 1, 1.0, 1.0, 1.0, 1.0 ; Combo size, (Multiplier for: ) Single, Double, Triple, Tetris
; db 2, 1.0, 1.2, 1.4, 1.5
; db 3, 1.0, 1.2, 1.5, 1.8
; db 4, 1.0, 1.4, 1.6, 2.0
; db 5, 1.0, 1.4, 1.7, 2.2
; db 6, 1.0, 1.4, 1.8, 2.3
; db 7, 1.0, 1.4, 1.9, 2.4
; db 8, 1.0, 1.5, 2.0, 2.5
; db 9, 1.0, 1.5, 2.1, 2.6
; db 10, 2.0, 2.5, 3.0, 3.0
sTGM3LevelMultiplier:
db 1 ; 000-249
db 2 ; 250-499
db 3 ; 500-749
db 4 ; 750-999
sTGM3BaselineCOOL:
db 52 ;070 (value in seconds)
db 52 ;170
db 49 ;270
db 45 ;370
db 45 ;470
db 42 ;570
db 42 ;670
db 38 ;770
db 38 ;870
sTGM3REGRETConditions:
db 1, 30 ;minutes, seconds
db 1, 15
db 1, 15
db 1, 8
db 1, 0
db 1, 0
db 0, 50
db 0, 50
db 0, 50
db 0, 50
sDMGTGrading: sDMGTGrading:
db 125, 10, 20, 40, 50 ; Grade 9 — frames/decay, single base, double base, triple base, tetris base db 125, 10, 20, 40, 50 ; Grade 9 — frames/decay, single base, double base, triple base, tetris base
db 80, 10, 20, 30, 40 ; Grade 8 — frames/decay, single base, double base, triple base, tetris base db 80, 10, 20, 30, 40 ; Grade 8 — frames/decay, single base, double base, triple base, tetris base
@ -106,262 +229,18 @@ sDMGTGaugeLUT:
db 32,32,32,32,32,32,32,32,32,32,32,32,32,32,32,32 db 32,32,32,32,32,32,32,32,32,32,32,32,32,32,32,32
db 32,32,32,32,32,32,32,32,32,32,32,32,32,32,32,32 db 32,32,32,32,32,32,32,32,32,32,32,32,32,32,32,32
sTGM1GradeScores: SECTION "Grading Functions", ROM0
dw $0003 ;00 — 8
dw $0006 ;00 — 7
dw $0009 ;00 — 6
dw $0015 ;00 — 5
dw $0021 ;00 — 4
dw $0039 ;00 — 3
dw $0060 ;00 — 2
dw $0090 ;00 — 1
dw $0120 ;00 — S1
dw $0165 ;00 — S2
dw $0225 ;00 — S3
dw $0300 ;00 — S4
dw $0390 ;00 — S5
dw $0495 ;00 — S6
dw $0615 ;00 — S7
dw $0750 ;00 — S8
dw $0900 ;00 — S9
sTGM3InternalGradeSystem:
db 125, 10, 20, 40, 50 ;Decay rate, (Internal grade points awarded for:) Single, Double, Triple, Tetris
db 80, 10, 20, 30, 40
db 80, 10, 20, 30, 40
db 50, 10, 15, 30, 40
db 45, 5, 15, 20, 40
db 45, 5, 15, 20, 30
db 45, 5, 10, 20, 30
db 40, 5, 10, 15, 30
db 40, 5, 10, 15, 30
db 40, 5, 10, 15, 30
db 40, 2, 12, 13, 30
db 40, 2, 12, 13, 30
db 30, 2, 12, 13, 30
db 30, 2, 12, 13, 30
db 30, 2, 12, 13, 30
db 20, 2, 12, 13, 30
db 20, 2, 12, 13, 30
db 20, 2, 12, 13, 30
db 20, 2, 12, 13, 30
db 20, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 15, 2, 12, 13, 30
db 10, 2, 12, 13, 30
db 10, 2, 12, 13, 30
sTGM3GradeBoosts:
db 0 ;9 (0 = add 0, 1 = add 1)
db 1 ;8
db 1 ;7
db 1 ;6
db 1 ;5
db 1 ;4
db 0 ;4
db 1 ;3
db 0 ;3
db 1 ;2
db 0 ;2
db 0 ;2
db 1 ;1
db 0 ;1
db 0 ;1
db 1 ;S1 (yes, here you finally get into the S grades, unless you are very COOL)
db 0 ;S1
db 1 ;S2
db 1 ;S3
db 1 ;S4
db 0 ;S4
db 0 ;S4
db 1 ;S5
db 0 ;S5
db 1 ;S6
db 0 ;S6
db 1 ;S7
db 0 ;S7
db 1 ;S8
db 0 ;S8
db 1 ;S9
sTGM3HowManyInternalGradesToDecrease:
db 0 ;9 (0 = substract 0, 1 = substract 1, etc.)
db 1 ;8
db 1 ;7
db 1 ;6
db 1 ;5
db 1 ;4
db 2 ;4
db 1 ;3
db 2 ;3
db 1 ;2
db 2 ;2
db 3 ;2
db 1 ;1
db 2 ;1
db 3 ;1
db 1 ;S1
db 2 ;S1
db 1 ;S2
db 1 ;S3
db 1 ;S4
db 2 ;S4
db 3 ;S4
db 1 ;S5
db 2;S5
db 1 ;S6
db 2 ;S6
db 1 ;S7
db 2 ;S7
db 1 ;S8
db 2 ;S8
db 1 ;S9
sTGM3HowManyInternalGradesToIncrease:
db 1 ;9 (0 = add 0, 1 = add 1, etc.)
db 1 ;8
db 1 ;7
db 1 ;6
db 1 ;5
db 2 ;4
db 1 ;4
db 2 ;3
db 1 ;3
db 3 ;2
db 2 ;2
db 1 ;2
db 3 ;1
db 2 ;1
db 1 ;1
db 2 ;S1
db 1 ;S1
db 1 ;S2
db 1 ;S3
db 3 ;S4
db 2 ;S4
db 1 ;S4
db 2 ;S5
db 1 ;S5
db 2 ;S6
db 1 ;S6
db 2 ;S7
db 1 ;S7
db 2 ;S8
db 1 ;S8
db 1 ;S9
sTGM3ComboMultipliers:
db 1, 1, 1, 1, 1 ; Combo size, (Multiplier for: ) Single, Double, Triple, Tetris (Screw the fractional part, x.5 gets rounded down)
db 2, 1, 1, 1, 1
db 3, 1, 1, 1, 2
db 4, 1, 1, 2, 2
db 5, 1, 1, 2, 2
db 6, 1, 1, 2, 2
db 7, 1, 1, 2, 2
db 8, 1, 1, 2, 2
db 9, 1, 1, 2, 3
db 10, 2, 2, 3, 3
sTGM3LevelMultiplier:
db 2 ; 250-499
db 3 ; 500-749
db 4 ; 750-999
sTGM3BaselineCOOL:
db 52 ;070 (value in seconds)
db 52 ;170
db 49 ;270
db 45 ;370
db 45 ;470
db 42 ;570
db 42 ;670
db 38 ;770
db 38 ;870
sTGM3REGRETConditions:
db 1, 30 ;minutes, seconds
db 1, 15
db 1, 15
db 1, 8
db 1, 0
db 1, 0
db 0, 50
db 0, 50
db 0, 50
db 0, 50
sTGM3StaffrollGrading: ;subgrades awarded per line clear
db 1 ;Single
db 2 ;Double
db 3 ;Triple
db 10 ;Tetris
db 16 ;Clear
SECTION "Grading Functions Unbanked", ROM0
GradeInit::
ld b, BANK_GAMEPLAY
rst RSTSwitchBank
call GradeInitB
jp RSTRestoreBank
UpdateGrade::
ld b, BANK_GAMEPLAY
rst RSTSwitchBank
call UpdateGradeB
jp RSTRestoreBank
DecayGradeProcess::
ld b, BANK_GAMEPLAY
rst RSTSwitchBank
call DecayGradeProcessB
jp RSTRestoreBank
DecayGradeDelay::
ld b, BANK_GAMEPLAY
rst RSTSwitchBank
call DecayGradeDelayB
jp RSTRestoreBank
TGM3REGRETHandler::
ld b, BANK_GAMEPLAY
rst RSTSwitchBank
call TGM3REGRETHandlerB
jp RSTRestoreBank
TGM3COOLHandler::
ld b, BANK_GAMEPLAY
rst RSTSwitchBank
call TGM3COOLHandlerB
jp RSTRestoreBank
SECTION "Grading Functions Banked", ROMX, BANK[BANK_GAMEPLAY]
; Wipe the grading variables. ; Wipe the grading variables.
GradeInitB: GradeInit::
xor a, a xor a, a
ld [wDecayRate], a ld [wDecayRate], a
ld [wInternalGradePoints], a ld [wGradePoints], a
ld [wInternalGrade], a
ld [wDisplayedGrade], a ld [wDisplayedGrade], a
ld [wRankingDisqualified], a ld [wRankingDisqualified], a
ld [wEffectTimer], a ld [wEffectTimer], a
ld [wDecayCounter], a ld [wDecayCounter], a
ld [wGradeGauge], a ld [wGradeGauge], a
ld [wSubgrade], a
ld [wGradeBoosts], a
ld [wCOOLIsActive], a
ld [wREGRETChecked], a
ld [wPrevCOOL], a
ld [wPrevCOOL+1], a
ld [wPrevCOOL+2], a
ld [wTGM1level300RequirementMet], a ld [wTGM1level300RequirementMet], a
ld [wTGM1level500RequirementMet], a ld [wTGM1level500RequirementMet], a
ld [wTGM1level999RequirementMet], a ld [wTGM1level999RequirementMet], a
@ -370,12 +249,10 @@ GradeInitB:
ld a, GRADE_NONE ld a, GRADE_NONE
ld [wDisplayedGrade], a ld [wDisplayedGrade], a
; TGM1, TGM3, and DMGT are the exceptions. ; TGM1 and DMGT are the exceptions.
ld a, [wSpeedCurveState] ld a, [wSpeedCurveState]
cp a, SCURVE_TGM1 cp a, SCURVE_TGM1
jr z, .grade9start jr z, .grade9start
cp a, SCURVE_TGM3
jr z, .grade9start
cp a, SCURVE_DMGT cp a, SCURVE_DMGT
jr z, .grade9start jr z, .grade9start
jr .end jr .end
@ -385,11 +262,11 @@ GradeInitB:
ld [wDisplayedGrade], a ld [wDisplayedGrade], a
.end .end
; Falls through intentionally. jr UpdateGrade
; Jumps to the grade update function for the current mode. ; Jumps to the grade update function for the current mode.
UpdateGradeB: UpdateGrade::
ld hl, .gradejumptable ld hl, .gradejumptable
ld a, [wSpeedCurveState] ld a, [wSpeedCurveState]
ld b, a ld b, a
@ -403,7 +280,7 @@ UpdateGradeB:
.gradejumptable .gradejumptable
jp UpdateGradeDMGT ;DMGT jp UpdateGradeDMGT ;DMGT
jp UpdateGradeTGM1 ;TGM1 jp UpdateGradeTGM1 ;TGM1
jp UpdateGradeTGM3 ;TGM3 no_jump ;TGM3
jp UpdateGradeDEAT ;DEAT jp UpdateGradeDEAT ;DEAT
jp UpdateGradeSHIR ;SHIR jp UpdateGradeSHIR ;SHIR
no_jump ;CHIL no_jump ;CHIL
@ -412,7 +289,7 @@ UpdateGradeB:
; Jumps to the grade decay function for the current mode. ; Jumps to the grade decay function for the current mode.
; Called once per frame where a piece is in motion. ; Called once per frame where a piece is in motion.
DecayGradeProcessB: DecayGradeProcess::
ld hl, .gradejumptable ld hl, .gradejumptable
ld a, [wSpeedCurveState] ld a, [wSpeedCurveState]
ld b, a ld b, a
@ -426,7 +303,7 @@ DecayGradeProcessB:
.gradejumptable .gradejumptable
jp DecayGradeDMGT ;DMGT jp DecayGradeDMGT ;DMGT
no_jump ;TGM1 no_jump ;TGM1
jp DecayGradeTGM3 ;TGM3 no_jump ;TGM3
no_jump ;DEAT no_jump ;DEAT
no_jump ;SHIR no_jump ;SHIR
no_jump ;CHIL no_jump ;CHIL
@ -435,7 +312,7 @@ DecayGradeProcessB:
; Jumps to the grade decay function for the current mode. ; Jumps to the grade decay function for the current mode.
; Called once per frame during ARE and line clear delay. ; Called once per frame during ARE and line clear delay.
DecayGradeDelayB: DecayGradeDelay::
ld hl, .gradejumptable ld hl, .gradejumptable
ld a, [wSpeedCurveState] ld a, [wSpeedCurveState]
ld b, a ld b, a
@ -449,7 +326,7 @@ DecayGradeDelayB:
.gradejumptable .gradejumptable
no_jump ;DMGT no_jump ;DMGT
no_jump ;TGM1 no_jump ;TGM1
jp DecayGradeTGM3 ;TGM3 no_jump ;TGM3
no_jump ;DEAT no_jump ;DEAT
no_jump ;SHIR no_jump ;SHIR
no_jump ;CHIL no_jump ;CHIL
@ -472,7 +349,7 @@ PrepareScore:
ld b, a ld b, a
ret ret
DrawGradeProgressDMGT: DrawGradeProgressDMGT::
ld a, [wDisplayedGrade] ld a, [wDisplayedGrade]
cp a, GRADE_GM cp a, GRADE_GM
jr nz, :+ jr nz, :+
@ -483,12 +360,11 @@ DrawGradeProgressDMGT:
ld b, 0 ld b, 0
ld c, a ld c, a
add hl, bc add hl, bc
ld a, [hl] ld a, [hl]
call SetProgress call SetProgress
ret ret
UpdateGradeDMGT: UpdateGradeDMGT::
; Check if the torikan hasn't been calculated. ; Check if the torikan hasn't been calculated.
ld a, [wRankingDisqualified] ld a, [wRankingDisqualified]
cp a, $FF cp a, $FF
@ -758,7 +634,7 @@ UpdateGradeDMGT:
ret ret
DecayGradeDMGT: DecayGradeDMGT::
; Bail if the gauge is empty. ; Bail if the gauge is empty.
ld a, [wGradeGauge] ld a, [wGradeGauge]
or a, a or a, a
@ -1217,465 +1093,4 @@ UpdateGradeSHIR:
ldh [hNLevel+3], a ldh [hNLevel+3], a
jp TriggerKillScreen jp TriggerKillScreen
UpdateGradeTGM3:
; First things first, Update our grade points.
.GradePoints
; Load the Table address to HL.
ld hl, sTGM3InternalGradeSystem
; Get the correct offset using the lines cleared on the frame and our current Internal Grade.
; Make sure the offsets are set properly and that the amount of Cleared lines isn't 0.
ld a, [wInternalGrade] ; Example: 3
cp a, 0 ; If it's 0, we don't need to do weird math.
jr z, .GetOffset
ld d, a ; ld d, 3
ld b, 5
ld a, b ; ld a, 5
dec d ;dec 3 to 2, so we don't accidentally add more than intended
: add a, b ; 5+5 = 10 ; 10+5 = 15
dec d
jr nz, :- ; go back if d isn't 0
ld b, a ; ld b, 15
.GetOffset
ld a, [hLineClearCt]
cp a, 0 ; If no lines were cleared, we don't need to do anything, just continue
jp z, .IncreaseInternalGrade
add a, b
ld b, 0
ld c, a
add hl, bc
ld a, [hl]
ld e, a ; We will use almost all registers to get the multipliers, so we need to keep the points we should add in a safe spot
jp .multipliers
.loadpoints
ld hl, wInternalGradePoints
add a, [hl]
ld [wInternalGradePoints], a
jp .IncreaseInternalGrade
.multipliers
; There are some multipliers to help us increase our grade faster
ld hl, sTGM3ComboMultipliers
ld a, [hComboCt] ; Example: 3
cp a, 0
ld d, a ; ld d, 3
ld b, 5
ld a, b ; ld a, 5
dec d ;dec 3 to 2, so we don't accidentally add more than intended
: add a, b ; 5+5 = 10 ; 10+5 = 15
dec d
jr nz, :- ; go back if d isn't 0
ld b, a ; ld b, 15
ld a, [hLineClearCt]
cp a, 0 ; If no lines were cleared, we don't need to do anything, just continue
jr z, .levelmultiplier
add a, b
ld b, 0
ld c, a
add hl, bc
ld a, [hl] ; Now we got our multiplier!, let's apply it.
dec a ; A multiplier of 1 shouldn't change anything, so let's get rid of them
cp a, 0
jr z, .levelmultiplier; Continue
ld b, a ; Load the multiplier into B
ld a, e ; Remember the points we got earlier?, here they are
ld c, a ; We will add from C
: add a, c
dec b
jr nz, :-
; Finally!, we can now load the points, right?, NO!, there is yet another multiplier...
; We have to keep the points safe again...
ld e, a
.levelmultiplier
; Make HL point to the table that contains the level multipliers
ld hl, sTGM3LevelMultiplier
; Get our level into BC
ld a, [hCLevel+3]
ld b, a
ld a, [hCLevel+2]
swap a
or b
ld c, a
ld a, [hCLevel+1]
ld b, a
ld a, [hCLevel]
swap a
or b
ld b, a
.Level750
; Is our level 750 or higher?
ld a, b
cp a, LEVEL_MULT_3A
; If B is less than 7, that means we are not even in level 700, so check for 500
jr c, .Level500
; If B is NOT less than 7, we might be in level 750 or greater, so check the remaining digits.
ld a, c
cp a, LEVEL_MULT_3B
; If C is less than 50, we didn't reach level 750 yet, but we are for sure in the 7** Section, load the corresponding offset.
jp .under750
; If C is equal or greater than 50, then congrats!, load the corresponding offset
ld b, 0
ld c, 2
add hl, bc
ld a, [hl]
jp .Multiply
.under750
ld b, 0
ld c, 1
add hl, bc
ld a, [hl]
.Level500
; Is our level 500 or higher?
ld a, b
cp a, LEVEL_MULT_2A
; If B is less than 5, that means we are not even in level 500, so check for 250
jr c, .Level250
; If B is NOT less than 5, we are in level 500 or greater
ld b, 0
ld c, 2
add hl, bc
ld a, [hl]
jp .Multiply
.Level250 ; There is no Offset, so just get the multiplier
; Is our level 750 or higher?
ld a, b
cp a, LEVEL_MULT_1A
; If B is less than 2, that means we are not even in level 200, so no multiplier
jr c, .under250
; If B is NOT less than 2, we might be in level 250 or greater, so check the remaining digits.
ld a, c
cp a, LEVEL_MULT_1B
; If C is less than 50, we didn't reach level 250 yet, so no multiplier
jp .under250
; If C is equal or greater than 50, then congrats!, load the corresponding offset (I said there is no Offset!)
ld a, [hl]
jp .Multiply
.under250 ; There is no multiplier, so just load the points
ld a, e
jp .loadpoints
.Multiply ; FINALLY!!!!!, This took forever!
ld b, a ; Load the multiplier into B
ld a, e ; Remember the points we got earlier?, here they are... Again.
ld c, a ; We will add from C
: add a, c
dec b
jr nz, :-
; AND NOW WE ARE DONE!, LOAD THOSE POINTS!
jp .loadpoints
.IncreaseInternalGrade
; Are we on level *00-*05?
ld a, [hCLevel+CLEVEL_ONES]
cp a, 6
; If we are, jump to the update COOL grade funcion just in case we have to apply a section COOL
jr c, CheckCOOL
; If not, continue
; Do we have 100 Grade Points?
ld a, [wInternalGradePoints]
cp a, 100
ret c ; If the Internal Grade Points is less than 100, return, we don't have to change our Grade
xor a, a ; Reset the points to 0 and increase the internal grade
ld [wInternalGradePoints], a
ld a, [wInternalGrade]
inc a
ld [wInternalGrade], a
; This falls to the next function, this is intentional
TGM3UpdateDisplayedGrade:
ld a, [wDisplayedGrade] ; If we are a GM Grade, return
cp a, GRADE_GM
ret z
ld a, GRADE_9 ; Load the lowest grade into a
ld b, a ; Then save it into b
ld hl, sTGM3GradeBoosts ; Make HL point to the Grade boosts table
ld a, [wInternalGrade] ; Get the offset
ld b, 0
ld c, a
add hl, bc
ld a, [hl] ; Load the boosts to add into a...
ld b, a
.update
ld a, [wGradeBoosts] ; Load the boosts variable into A
add a, b ;Add the boosts
ld b, a
; HOLD IT!
ld a, [wCOOLIsActive] ; Did the player get a cool on this section?
cp a, 1
jp nz, .nocool ; If not, proceed as normal
; If it did, check if we are at level *00-*05
ld a, [hCLevel+CLEVEL_TENS]
cp a, 0
jr nz, .nocool
ld a, [hCLevel+CLEVEL_ONES]
cp a, 5
jr c, .cool
jr nz, .nocool ; If not, proceed as normal
.cool
ld hl, sTGM3HowManyInternalGradesToIncrease ; Make HL point to the..., yeah.
ld a, [wInternalGrade] ; Get the offset
ld d, a ; save the internal grade because we need it later
ld b, 0
ld c, a
add hl, bc
ld a, [hl] ; Load the amount of internal grades to increase into a
add a, d ; Increase the internal grades
ld [wInternalGrade], a ; Load them
ld a, [wGradeBoosts] ; Load the boosts variable into A
inc a
ld [wGradeBoosts], a
ld [wDisplayedGrade], a ; Load the boosts into the displayed grade
xor a, a
ld [wCOOLIsActive], a ; Make the cool no longer be active
ret
.nocool
;ld [wDisplayedGrade], a ; HOLD IT!
ld a, [wDisplayedGrade]
cp a, b
ret z ; If the grade is the same, return.
ld a, b
; If the grade results in an S10, set it to m1
cp a, GRADE_S10
jr nz, .continue
ld a, GRADE_M1
.continue
ld [wDisplayedGrade], a ; Otherwise, set the grade.
ld [wGradeBoosts], a ; And the grade boosts too.
; ...Play the jingle.
ld a, SFX_RANKUP
call SFXEnqueue
; Prepare the effect stuff
ld a, $0f
ld [wEffectTimer], a
ret
CheckCOOL:
ld a, [wCOOLIsActive] ; Did the player get a cool on this section?
cp a, 1
ret nz
; If it did, check if we are at level *00-*05
ld a, [hCLevel+CLEVEL_TENS]
cp a, 0
ret nz
ld a, [hCLevel+CLEVEL_ONES]
cp a, 5
jr c, .cool
ret nz ; If not, proceed as normal
.cool
ld hl, sTGM3HowManyInternalGradesToIncrease ; Make HL point to the..., yeah.
ld a, [wInternalGrade] ; Get the offset
ld d, a ; save the internal grade because we need it later
ld b, 0
ld c, a
add hl, bc
ld a, [hl] ; Load the amount of internal grades to increase into a
add a, d ; Increase the internal grades
ld [wInternalGrade], a ; Load them
ld a, [wGradeBoosts] ; Load the boosts variable into A
inc a
ld [wGradeBoosts], a
ld [wDisplayedGrade], a ; Load the boosts into the displayed grade
xor a, a
ld [wCOOLIsActive], a ; Make the cool no longer be active
jp SkipSection
DecayGradeTGM3:
; Check if we can decrease the Grade points, if not, decrease the timer
ld a, [wDecayRate]
cp a, 0
jr z, .points
ld b, a ; Save the timer
ld a, [hComboCt] ; If there is an active combo, do not decrease the counter, return instead
dec a
and a
ret nz
ld a, b ; Load the timer back
dec a
ld [wDecayRate], a
ret
.points
ld a, [wInternalGradePoints] ; Do we have 0 grade points?
cp a, 0
ret z ; If so, return
dec a
cp a, 0 ; Do we have 0 now?
jr z, .lpoints ; If so, load the points, since we don't have any points to decay
; Else, load the points and the corresponding Decay Rate
ld [wInternalGradePoints], a
; Get the Decay Rate required
ld hl, sTGM3InternalGradeSystem
ld a, [wInternalGrade] ; Example: 3
cp a, 0 ; If it's 0, we don't need to do weird math.
jr z, .GetOffset
ld d, a ; ld d, 3
ld b, 5
ld a, b ; ld a, 5
dec d ;dec 3 to 2, so we don't accidentally add more than intended
: add a, b ; 5+5 = 10 ; 10+5 = 15
dec d
jr nz, :- ; go back if d isn't 0
.GetOffset
ld b, 0
ld c, a
add hl, bc
ld a, [hl] ; Load the rate into a...
ld [wDecayRate], a ; ... and then into the timer
ret
.lpoints
ld [wInternalGradePoints], a
ret
TGM3COOLHandlerB:
; First check our previous cool
ld a, [wPrevCOOL] ; Are the minutes 0?
cp a, 0
jr nz, .checkCOOL
; If so, check the seconds
ld a, [wPrevCOOL+1]
cp a, 0
jr nz, .checkCOOL
; The seconds are 0 too?, hmm, check the frames
ld a, [wPrevCOOL+2]
cp a, 0
jr nz, .checkCOOL
; No cool???, check the baseline cool then...
ld hl, sTGM3BaselineCOOL
ld a, [hCLevel+1]
add a
ld b, 0
ld c, a
add hl, bc
ld a, [hl+]
ld b, a
ld a, [hl]
ld c, a
jp .checkBaselineCOOL
.checkCOOL
ld a, [wPrevCOOL]
ld b, a
ld a, [wPrevCOOL+1]
; Give the player 2 seconds to spare
sub a, 2
ld c, a
.checkBaselineCOOL
call CheckCOOL_REGRET
cp a, $ff
jp nz, .nocool
.cool ; If the player got a cool, set the active cool variable to 1, also set the previous cool variables to the correct value
ld a, 1
ld [wCOOLIsActive], a
ld a, [wSectionMinutes]
ld [wPrevCOOL], a
ld a, [wSectionSeconds]
ld [wPrevCOOL+1], a
ld a, [wSectionFrames]
ld [wPrevCOOL+2], a
ld a, 1 ; Leave a value in A so we know if the code ran
ret ; Done
.nocool ; If the player misses a cool, set the previous cool variables to 0, then return
ld [wPrevCOOL], a
ld [wPrevCOOL+1], a
ld [wPrevCOOL+2], a
ld a, 1 ; Leave a value in A so we know if the code ran
ret
TGM3REGRETHandlerB: ; Check if we took too much time to complete a section
ld a, [wREGRETChecked] ; First, make sure we haven't checked before
cp a, 1
ret z ; If we did, just return
ld hl, sTGM3REGRETConditions
ld a, [hCLevel+1]
dec a
add a
ld b, 0
ld c, a
add hl, bc
ld a, [hl+]
ld b, a
ld a, [hl]
ld c, a
call CheckCOOL_REGRET
cp a, 0
ret nz
.regret
ld a, [wInternalGrade]
cp a, 0
ret z
xor a, a
ld [wInternalGradePoints], a
ld a, [wGradeBoosts]
dec a
ld [wGradeBoosts], a
ld hl, sTGM3HowManyInternalGradesToDecrease ; Make HL point to the..., yeah.
ld a, [wInternalGrade] ; Get the offset
ld d, a ; save the internal grade because we need it later
ld b, 0
ld c, a
add hl, bc
ld a, [hl] ; Load the amount of internal grades to decrease into a
sub a, d ; Decrease the internal grades
ld [wInternalGrade], a ; Load them
ld a, [wGradeBoosts] ; Load the boosts variable into A
ld [wDisplayedGrade], a ; Load the boosts into the displayed grade
ld a, 1
ld [wREGRETChecked], a
ret ; Done
TGM3StaffRollGradeUpdate:
; Make HL Point to the Staffroll Table
ld hl, sTGM3StaffrollGrading
; Get the offset, if no lines were cleared, return
ld a, [hLineClearCt]
and a
ret z
dec a
ld b, 0
ld c, a
add hl, bc
; Load the value into A
ld a, [hl]
; And then add that to the subgrade variable
ld b, a
ld a, [wSubgrade]
add a, b
ld [wSubgrade], a
.UpdateGrade
cp a, $a
ret c
sub a, $a
ld [wSubgrade], a
ld a, [wDisplayedGrade]
inc a
ld [wDisplayedGrade], a
ret
ENDC ENDC

View File

@ -403,11 +403,6 @@ DEF NLEVEL_THOUSANDS EQU 0
DEF NLEVEL_HUNDREDS EQU 1 DEF NLEVEL_HUNDREDS EQU 1
DEF NLEVEL_TENS EQU 2 DEF NLEVEL_TENS EQU 2
DEF NLEVEL_ONES EQU 3 DEF NLEVEL_ONES EQU 3
DEF LEVEL_MULT_1A EQU $02
DEF LEVEL_MULT_1B EQU $50
DEF LEVEL_MULT_2A EQU $05
DEF LEVEL_MULT_3A EQU $07
DEF LEVEL_MULT_3B EQU $50
; Title screens ; Title screens
DEF TITLE_MAIN EQU 0 DEF TITLE_MAIN EQU 0

View File

@ -329,16 +329,16 @@ LevelUp::
ld hl, hCLevel+2 ld hl, hCLevel+2
ld a, [hl+] ld a, [hl+]
cp a, 9 cp a, 9
jp nz, AdjustSpeedCurve jr nz, AdjustSpeedCurve
ld a, [hl] ld a, [hl]
cp a, 8 cp a, 8
jp nz, AdjustSpeedCurve jr nz, AdjustSpeedCurve
ld a, $FF ld a, $FF
ldh [hRequiresLineClear], a ldh [hRequiresLineClear], a
call SFXKill call SFXKill
ld a, SFX_LEVELLOCK ld a, SFX_LEVELLOCK
call SFXEnqueue call SFXEnqueue
jp .leveljinglemaybe jr .leveljinglemaybe
; Otherwise check the second digit of wCLevel. ; Otherwise check the second digit of wCLevel.
: ld hl, hCLevel+1 : ld hl, hCLevel+1
@ -363,62 +363,6 @@ LevelUp::
ld hl, hNLevel+1 ld hl, hNLevel+1
ld [hl], a ld [hl], a
; Check for regrets or cools
; Make sure we are at level *70-*78 and that we didn't check for the cool already
.checkcool
ld a, [wSpeedCurveState]
cp a, SCURVE_TGM3
jr nz, .bellmaybe
ld a, [wCOOLIsActive]
cp a, 1
jr z, .checkregret
ld a, [hCLevel+CLEVEL_TENS]
cp a, 7
jr nz, .checkregret
ld a, [hCLevel+CLEVEL_ONES]
cp a, 9
call c, TGM3COOLHandler
cp a, 1
jr z, .bellmaybe
.checkregret
; Make sure we are at level *00-*05 and that we haven't checked already. Reset the section timer, too.
ld a, [wREGRETChecked]
cp a, 1
jr z, .bellmaybe
ld a, [hCLevel+CLEVEL_TENS]
cp a, 0
jr nz, .regretavailable
ld a, [hCLevel+CLEVEL_ONES]
cp a, 6
call c, TGM3REGRETHandler
ld a, [wSectionTimerReset]
cp a, 1
jr z, .bellmaybe
.resetsectiontimer
ld a, [hCLevel+CLEVEL_HUNDREDS]
ld b, a
ld a, [hCLevel+CLEVEL_THOUSANDS]
swap a
or b
cp a, $00
jr z, .regretavailable
ld a, [hCLevel+CLEVEL_TENS]
cp a, 0
jr nz, .regretavailable
xor a, a
ld [wSectionMinutes], a
ld [wSectionSeconds], a
ld [wSectionFrames], a
inc a
ld [wSectionTimerReset], a
.regretavailable
xor a, a
ld [wREGRETChecked], a
.bellmaybe .bellmaybe
; If the last two digits of wCLevel are 99, play the bell. ; If the last two digits of wCLevel are 99, play the bell.
ld hl, hCLevel+2 ld hl, hCLevel+2

View File

@ -116,7 +116,6 @@ EventLoop::
; Wrangle inputs and timers at the start of every frame. ; Wrangle inputs and timers at the start of every frame.
call GetInput call GetInput
call HandleTimers call HandleTimers
call HandleSectionTimers
; Call the current state's event handler. ; Call the current state's event handler.
ld hl, .eventloopjumps ld hl, .eventloopjumps

View File

@ -607,10 +607,10 @@ sTGM3SpeedCurveEnd::
sTGM3SpeedCurveSpecialData:: sTGM3SpeedCurveSpecialData::
dw $FFFF ; When do we get bones? dw $FFFF ; When do we get bones?
dw 999 ; When do blocks turn invisible? dw 1299 ; When do blocks turn invisible?
dw 999 ; When is the hard kill screen? dw 1299 ; When is the hard kill screen?
dw $0999 ; Same but in BCD. dw $1299 ; Same but in BCD.
dw 998 ; If the last level lock isn't at x99, where is it? dw 1298 ; If the last level lock isn't at x99, where is it?
dw 3600 ; How long does the staff roll last after the kill screen, in frames. dw 3600 ; How long does the staff roll last after the kill screen, in frames.
db $00 ; Big mode in staff roll? db $00 ; Big mode in staff roll?
@ -701,7 +701,7 @@ sSHIRSpeedCurveEnd::
dw $FFFF dw $FFFF
sSHIRSpeedCurveSpecialData:: sSHIRSpeedCurveSpecialData::
dw 1000 ; When do we get bones? dw 900 ; When do we get bones?
dw $FFFF ; When do blocks turn invisible? dw $FFFF ; When do blocks turn invisible?
dw 1300 ; When is the hard kill screen? dw 1300 ; When is the hard kill screen?
dw $1300 ; Same but in BCD. dw $1300 ; Same but in BCD.
@ -1006,12 +1006,12 @@ sTitleTiles::
DB $00,$00,$00,$00,$00,$00,$00,$00 DB $00,$00,$00,$00,$00,$00,$00,$00
DB $19,$19,$3F,$3F,$66,$66,$66,$66 DB $19,$19,$3F,$3F,$66,$66,$66,$66
DB $FF,$FF,$FF,$FF,$79,$79,$30,$30 DB $FF,$FF,$FF,$FF,$79,$79,$30,$30
DB $00,$00,$01,$00,$00,$00,$00,$00 DB $00,$00,$01,$01,$03,$03,$01,$01
DB $01,$00,$00,$00,$00,$00,$00,$00 DB $A1,$A1,$A1,$A1,$41,$41,$4B,$4B
DB $80,$80,$C0,$C0,$60,$60,$60,$60 DB $80,$80,$C0,$C0,$60,$60,$60,$60
DB $F0,$F0,$F0,$F0,$E0,$E0,$C0,$C0 DB $F0,$F0,$F0,$F0,$E0,$E0,$C0,$C0
DB $86,$00,$81,$00,$82,$00,$81,$00 DB $00,$00,$0C,$0C,$02,$02,$02,$02
DB $D6,$00,$00,$00,$00,$00,$00,$00 DB $04,$04,$08,$08,$08,$08,$AE,$AE
DB $C0,$C0,$F0,$F0,$FC,$FC,$FF,$FF DB $C0,$C0,$F0,$F0,$FC,$FC,$FF,$FF
DB $FC,$FC,$F0,$F0,$C0,$C0,$00,$00 DB $FC,$FC,$F0,$F0,$C0,$C0,$00,$00
DB $C0,$00,$F0,$00,$FC,$00,$FF,$00 DB $C0,$00,$F0,$00,$FC,$00,$FF,$00

Binary file not shown.

Binary file not shown.

View File

@ -161,7 +161,7 @@ sTetryEXITProfile::
db " " db " "
sTitleAttrs:: sTitleAttrs::
db 7, 7, 7, 7, 1, 1, 0, 0, 0, 0, 0, 0, 0, 1, 2, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 db 7, 7, 7, 7, 1, 1, 0, 0, 0, 0, 0, 0, 0, 1, 2, 1, 7, 7, 7, 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
db 1, 1, 1, 1, 3, 3, 3, 1, 3, 3, 3, 3, 3, 3, 3, 3, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 db 1, 1, 1, 1, 3, 3, 3, 1, 3, 3, 3, 3, 3, 3, 3, 3, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
db 1, 1, 1, 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, 3, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 db 1, 1, 1, 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, 3, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
db 1, 1, 1, 1, 4, 4, 4, 1, 4, 4, 4, 1, 4, 4, 4, 4, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 db 1, 1, 1, 1, 4, 4, 4, 1, 4, 4, 4, 1, 4, 4, 4, 4, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

View File

@ -94,6 +94,8 @@ SwitchToGameplayB:
jr z, .ungraded jr z, .ungraded
cp a, SCURVE_MYCO cp a, SCURVE_MYCO
jr z, .ungraded jr z, .ungraded
cp a, SCURVE_TGM3 ; TODO: Remove when this one has grades.
jr z, .ungraded
.graded .graded
ld de, sGameplayTileMap ld de, sGameplayTileMap

View File

@ -31,12 +31,8 @@ SECTION "Time Variables", WRAM0
wMinutes:: ds 1 wMinutes:: ds 1
wSeconds:: ds 1 wSeconds:: ds 1
wFrames:: ds 1 wFrames:: ds 1
wSectionMinutes:: ds 1
wSectionSeconds:: ds 1
wSectionFrames:: ds 1
wCountDown:: ds 2 wCountDown:: ds 2
wCountDownZero:: ds 1 wCountDownZero:: ds 1
wSectionTimerReset:: ds 1
SECTION "Time Data", ROM0 SECTION "Time Data", ROM0
@ -65,9 +61,6 @@ TimeInit::
ld [wFrames], a ld [wFrames], a
ld [wCountDown], a ld [wCountDown], a
ld [wCountDown+1], a ld [wCountDown+1], a
ld [wSectionMinutes], a
ld [wSectionSeconds], a
ld [wSectionFrames], a
ld a , $FF ld a , $FF
ld [wCountDownZero], a ld [wCountDownZero], a
ld a, TACF_262KHZ | TACF_START ld a, TACF_262KHZ | TACF_START
@ -93,9 +86,6 @@ ResetGameTime::
ld [wMinutes], a ld [wMinutes], a
ld [wSeconds], a ld [wSeconds], a
ld [wFrames], a ld [wFrames], a
ld [wSectionMinutes], a
ld [wSectionSeconds], a
ld [wSectionFrames], a
ret ret
; Checks if the minute-second timer has reached a certain value. ; Checks if the minute-second timer has reached a certain value.
@ -208,88 +198,4 @@ HandleTimers::
ret ret
CheckCOOL_REGRET::
; Okay if minutes are less than max minutes.
ld a, [wSectionMinutes]
cp a, b
jr c, .success
; Check seconds if minutes are equal.
jr nz, .failure
; Okay if seconds are less than max seconds.
ld a, [wSectionSeconds]
cp a, c
jr c, .success
; Check frames if seconds are equal.
jr nz, .failure
; Okay if frames are exactly 0.
ld a, [wSectionFrames]
cp a, 0
jr z, .success
.failure
xor a, a
ret
.success
ld a, $FF
ret
HandleSectionTimers::
ldh a, [hMode]
cp a, MODE_PAUSED
ret z
cp a, MODE_GAME_OVER
ret z
cp a, MODE_PRE_GAME_OVER
ret z
ld a, [wKillScreenActive]
cp a, $FF
ret z
ld a, [hCLevel+CLEVEL_ONES]
cp a, 6
jr c, .continue
xor a, a
ld [wSectionTimerReset], a
.continue
ld a, [wSectionMinutes]
cp a, 99
jr nz, .sectiongo
ld a, [wSectionSeconds]
cp a, 59
jr nz, .sectiongo
ld a, [wSectionFrames]
cp a, 59
ret z
.sectiongo
ld a, [wSectionFrames]
inc a
ld [wSectionFrames], a
cp a, 60
ret nz
xor a, a
ld [wSectionFrames], a
ld a, [wSectionSeconds]
inc a
ld [wSectionSeconds], a
cp a, 60
ret nz
xor a, a
ld [wSectionSeconds], a
ld a, [wSectionMinutes]
inc a
ld [wSectionMinutes], a
ret
ENDC ENDC